Installation

Raspberry Pi Installation

• Install the official installer tool Raspberry Pi Imager
  Depending on the OS, find the adapted software.
  https://www.raspberrypi.com/software/

• Run the installer tool and configure the future OS

  • Depending on RPI model, choose an adequate OS

    RPI Model	Specs	OS Recommended	PSU
    RPi 1 B	700 Mhz - 256 MB	RPi OS Lite (32 bit)	>= 2.5A
    RPi 3 b	1 Ghz - 1 GB	RPi OS Lite (64 bit)	>= 2.5A

    • To identify the model

      cat /sys/firmware/devicetree/base/model
      cat /proc/cpuinfo
      # Check RAM
      free -h
      

  • Set hostname (rpi-(dogname).local)

  • Enable SSH

    • Pub Key : Use the RaspPI one

  • Define user

    • name : rpi
    • pass : rpi
    • Set local settigns
      • timezone: America/Montreal
      • Keyboard : ca

• SSH to board

  • Configure GPU memory to minimum
    sudo raspi-config nonint do_memory_split 16

• Update the board completely

  sudo apt update
  sudo apt full-upgrade -y
  reboot